一、概述

该机主要针对容易扬尘的超细粉末及高精度的包装要求而开发，根据装在容器下面的重量传感器给出的信号能自动完成快、中、慢三速填充、计量等工作。适用于包装添加剂、碳粉、灭火器干粉、其他超细粉末、及有高精度、无粉尘包装要求的粉末等。

二、性能特点

1.采用密闭式夹袋器和带有吸尘装置最大限度的减小粉尘。

2.配置滚轮方便下袋，极大的减轻了劳动强度。

3.控制系统为工业级PLC，抗干扰性强，不会出现死机的现象。

4.搅拌电机采用免保养、无噪音台湾产齿轮减速电动机。

5.透明料仓，物料运行状况一目了然，同时料位检测开关实现了不仅可以装在料仓里，也可以侧面装在外面，防止料位开关失灵的情况发生。

6.可打开料仓，无须把料仓拆掉即可进行清洗和保养，极大地减轻了工人的劳动强度，提高劳动效率。

8.光电感应下料方式和脚踏开关下料方式兼容。

9.具有两种计量方式(体积计量和重量计量)，二者可以随时转换：既可以用螺旋下料，电子秤称重反馈方式(小规格用);又可采用螺旋下料，电子秤直接称重，边下料边称重，1000克的包装精度可达到1克(适合于大包装)。

三、工作流程

人工套袋 →汽缸夹袋 →快速充填→ 重量达到预定快加值 →中速充填 →重量达到预定中加值 →慢速充填 → 重量达到目标值 → 自动落袋（或人工落袋）。

四、技术参数

标准机型技术参数(按普通面粉测试)：

包装速度：2-5包/分；

1. 包装精度：小于5克；

1. 电源：三相380(或单相220)；

1. 功率：1.8 KW；

1. 整机重量：180Kg；

1. 料仓容量：70升；

1. 加料口高度：2000mm；

1. 主机装配尺寸(长✘宽✘高)=710✘810✘2500mm

1、 Overview

This machine is mainly developed for ultra-fine powders that are prone to dust and high-precision packaging requirements. It can automatically complete fast, medium, and slow filling, metering, and other tasks based on the signal provided by the weight sensor installed under the container.  Suitable for packaging additives, carbon powder, fire extinguisher dry powder, other ultrafine powders, and powders with high-precision, dust-free packaging requirements.

2、 Performance characteristics

1. Use a sealed bag clamp and a vacuum cleaner to minimize dust to the greatest extent possible.

2. The configuration of rollers facilitates the placement of bags, greatly reducing labor intensity.

3. The control system is an industrial grade PLC with strong anti-interference ability and will not experience system crashes.

4. The mixing motor adopts a maintenance free and noise free Taiwan made gear reduction motor.

5. Transparent material bin, the material operation status is clear at a glance, and the level detection switch can be installed not only in the bin, but also on the outside to prevent the level switch from malfunctioning.

6. The silo can be opened for cleaning and maintenance without dismantling it, greatly reducing the labor intensity of workers and improving labor efficiency.

8. The photoelectric induction feeding method is compatible with the foot switch feeding method.

9. It has two measurement methods (volume measurement and weight measurement), which can be switched at any time: either using spiral feeding or electronic scale weighing feedback method (for small sizes);  Spiral feeding can also be used, and electronic scales can be used for direct weighing while feeding. The packaging accuracy of 1000 grams can reach 1 gram (suitable for large packaging).

3、 Workflow

Manual bagging → cylinder clamping → rapid filling → weight reaches predetermined fast addition value → medium speed filling → weight reaches predetermined medium addition value → slow filling → weight reaches target value → automatic bagging (or manual bagging).

4、 Technical parameters

Standard model technical parameters (tested with ordinary flour):