一、概述

1、该机由粉剂填充头、链板输送带及定位装置组成，能完成瓶子（罐子）的自动定位、填充及计量工作。采用步进电机，PLC触屏控制，操作简便、稳定性高。可与理瓶机、旋盖机、贴标机等组成整套灌装流水线。

2、适用于包装粉末及小颗粒物料，如粉剂、小颗粒剂药品、葡萄糖、调味品、固体饮料、碳粉、爽身粉等。

二、性能特点

1、体积计量：可以一次灌装2瓶，两个灌装头靠输入脉冲值计量。

2、采用连体料仓只需要配置一台上料机。

3、工业级的PLC控制，稳压可靠，抗干扰能力强，不会出现死机现象，称量精度高等优点。

4、工业级的称重模块、称重传感器保证精度更高。

5、触摸屏操作清楚显示各工作状态、操作指示、故障状态及生产统计等，操作简便直观。适合于文化程度不高或新工人。

6、可开启连体透明组合料仓，物料运行状态一目了然，拆装、清洗物料十分方便。

7、步进电机带动螺旋下料具有不易磨损、定位准确、转速可设定、性能稳定等优点。

8、更换螺旋附件，能够适用超细粉到小颗粒等多种物料。如小米、精盐等细小颗粒而且不损伤。

9、机头带升降机构，可根据不同的瓶子调整高度。

10、留有自动上料接口可配螺旋输送机。

11、输送带和主机连为一体，防止长时间使用后瓶口产生错位。

三、技术参数

1、包装范围：10g-500g；

2、包装速度：30-50瓶／分；

3、包装精度：≤士1 % 

4、电源.功率：AC380V 50HZ/60HZ   3KW；

5、压缩空气用量：0.05立方米/分钟

6、整机重量：350kg ；

7、主机尺寸：长x宽x高＝2000x950x2100(mm)

1、 Overview

1. The machine consists of a powder filling head, a chain plate conveyor belt, and a positioning device, which can automatically position, fill, and measure bottles (cans).  Adopting stepper motor and PLC touch screen control, it is easy to operate and has high stability.  It can be combined with bottle sorting machines, capping machines, labeling machines, etc. to form a complete filling assembly line.

2. Suitable for packaging powders and small granular materials, such as powders, small granular drugs, glucose, seasonings, solid beverages, carbon powder, talcum powder, etc.

2、 Performance characteristics

1. Volume measurement: Two bottles can be filled at once, and the two filling heads are measured by inputting pulse values.

2. The use of integrated silos only requires the configuration of one feeding machine.

3. Industrial grade PLC control has the advantages of reliable voltage regulation, strong anti-interference ability, no system crashes, and high weighing accuracy.

4. Industrial grade weighing modules and weighing sensors ensure higher accuracy.

5. The touch screen operation clearly displays various working statuses, operation instructions, fault statuses, and production statistics, making the operation simple and intuitive.  Suitable for low education level or new workers.

6. The integrated transparent combination silo can be opened, and the material operation status is clear at a glance, making it very convenient to disassemble, assemble, and clean materials.

7. The use of stepper motors to drive spiral feeding has advantages such as low wear, accurate positioning, adjustable speed, and stable performance.

8. Replacing the spiral attachment can be applied to various materials ranging from ultrafine powder to small particles.   Small particles such as millet and refined salt that are not damaged.

9. The machine head is equipped with a lifting mechanism, which can adjust the height according to different bottles.

10. There is an automatic feeding interface that can be equipped with a screw conveyor.

11. The conveyor belt is integrated with the host to prevent misalignment of the bottle mouth after prolonged use.

3、 Technical parameters

1. Packaging range: 10g-500g;

2. Packaging speed: 30-50 bottles per minute;

3. Packaging accuracy: ≤ ± 1%

4. Power supply  Power: AC380V 50HZ/60HZ 3KW;

5. Compressed air consumption: 0.05 cubic meters per minute

6. Whole machine weight: 350kg;

7. Host size: Length x Width x Height=2000x950x2100 (mm)